Fits STIHL 038 AV SUPER BIG BORE MODIFIED CYLINDER/PISTON PREMIUM KIT 52mm

THIS IS A 52 MM BIG BORE REPLACES CYLINDER. 50 MM Super P/N 1119 020 1201. 4 MOUNTING BOLT HOLES PRECISELY MILLED WITH JIG TO FIT. NOW 4- T27 M5 X 18mm special prepared screws included to mount cylinder.

Cylinder liner plating process is 0.07 to 0.10 mm thickness, this nearly twice that of other aftermarket units. Will not bolt on STANDARD 52mm 038, 380 CHAINSAWS this fits only 038 AV SUPER with 50mm original bore. WILL NO FIT 038 AV SAWS WITH 48mm WILL NEED CASE OPENING SLIGHTLY WIDENED WITH DIE GRINDER to allow this 52mm piston skirt to fit in. "Have installed and run test units on saws, this item you are purchasing is new uninstalled".

SITS STRAIGHT, TIGHT AND CENTER ON CASES. MAKE SURE YOUR CRANKSHAFT IS HEALTHY AS POWER INCREASE MAY BREAK WORN OUT CRANKS. "THIS IS A MODIFIED 038, 380 52mm MAGNUM CYLINDER". CAUTION DO NOT TRY THIS MOD YOURSELF WITHOUT PROPER JIG AS EACH HOLE IS MILLED DIFFERENT AS THE 380 MAGNUM HAS ECCENTRIC BOLT PATTERN. 9/64 ALLEN KEY WILL BE NEEDED TO TIGHTEN MOUNTING BOLTS AS TRADITIONAL T27 WRENCH WILL NO LONGER FIT OFF CENTER HOLE POSITION.

NO OTHER CHANGES NEEDED OTHER THAN POSSIBLY CARB ADJUSTMENT. This is a bolt on and run kit. THIS IS A # 1119 020 1202 CYLINDER MODIFIED TO REPLACE O. Includes- Cylinder, piston, piston rings, wrist pin, & clips. "Any saws shown are are not included they for display purpose only".

CYLINDER KIT ONLY FOR SALE, SAW SHOWN IS FOR DISPLAY PURPOSE ONLY. MY PHOTOS AND VIDEO ARE TAKEN BY US YOU WILL GET WHAT YOU SEE. CONTACT ME IF YOU HAVE ANY QUESTIONS. ONCE YOUR PACKAGE HAS LEFT CANADA. Small Packet - International Air: in as little as 4 business.

This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Chainsaw Parts". The seller is "can-ebuy" and is located in this country: CA. This item can be shipped worldwide.

Model: STIHL 038 AV SUPER BIG BORE
Type: CYLINDER PISTON REBUILD KIT FOR CHAINSAW
MPN: 1119 020 1201
Brand: AFTERMARKET Stihl REPLACEMENT
CYLINDER LINER MATERIAL: CHROMIUM
FACTORY FINISH: ALL PORTS CHAMFERED, VISUAL INSPECTION ALL PARTS
QUALITY ASSURANCE: PISTON TO WALL CLEARANCE & RING END GAP MEASURED
PRE-SHIPMENT INSPECTION: ASSURE ALL SPECS. ARE WITHIN LIMITS, WRIST PIN FIT
PRE-SHIPMENT PROCESS: RE-TAP ALL MOUNTING THREADS, FINAL VISUAL, CLEAN
PRE-SHIPMENT PACKAGING: CYLINDER IS WRAPPED IN AMPLE CARDBOARD AND TAPED
ENGINE DISPLACEMENT: 72.2 cc
PISTON DIAMETER: 52mm